background image

16

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: STR-WPTL6K   PRODUCT CODE: 62971  11/2018

Instructions

Before you start washing

A  Make sure the washer is stable 

and level. If necessary, adjust the 
adjustable leg to stabilise the  
washer (see page 10).

B  Make sure the water inlet hoses  

are properly installed (see  
page 11).

C  Plug the machine into a nearby 

power point.

D  Open the water taps. 
E  Make sure the drain hose is properly 

installed. Hang the upper end of the 
hose over the laundry sink or into a 
drain spout (see page 12).

1.  Before washing, remove any coins, keys and other hard items 

from pockets. Close any zippers to prevent damaging your 
clothes and the wash tub. Brush dirt and sand off clothes and 
turn pockets inside out.

2.  Sort your washing into appropriate loads: whites,  

coloureds, cottons, delicates, heavily soiled, etc.  
Place delicate items into a wash bag for protection.

On the back

Install 

the drain 

hose at a 

height of 

70-100cm 

to prevent 

water drain-

age and 

overflowing 

problems.

A

B

D

C

E

3.  Put your washing in the machine, loading items uniformly  

in the tub. 

4.  Add washing detergent (see opposite for details). 
5.  Press the POWER ON/OFF button.
6.  Refer to the Program Selection Guide (opposite) and select a suitable wash 

program. 

The machine will automatically choose the correct water level and 

wash and spin times for the NORMAL

 

and HEAVY DUTY programs, and the 

correct water level for the CUSTOM and QUICK programs. 

Other parameters 

can be set individually (see page 18).                    

18

7.  Close the lid and press the START/PAUSE button.

NOTE:  

If the washer lid is not closed properly, the washer will sound an alarm and 
stop working before spinning.

10

11

12

17

F  Before using the washing machine for 

the first time, run a complete cycle 
without laundry items and detergent.

 

Select the NORMAL program and run the 
machine until the end of the program.

Normal usage

Summary of Contents for STR-WPTL6K

































Reviews: