manualshive.com logo in svg

Stirling STR-WPTL6K, Instruction Manual

Share
Download
Stirling STR-WPTL6K Instruction Manual Download Page 15

15

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: STR-WPTL6K   PRODUCT CODE: 62971  11/2018

Start/Pause button

Temperature button

Power On/Off button

•  Press this button to switch the power on; press it again 

to switch it off.

•  To change the program, press this button once and then 

once more.

•  Power will be switched off automatically:  

(a) five seconds after the end of a program; 
(b) after 10 minutes of inactivity, after the POWER button 
has been pressed.

•  Press this button 

to start the washer 
operation.

•  During operation, 

press this button 
to stop the washer 
temporarily; press it 
again to restart the 
washer operation.

NOTE:

 This is not a 

CANCEL button.

•  Press this button if you 

want to choose the water 
temperature. The indicator 
above will alight (for warm) 
and flash (for hot) water. 
When the indicator is off, 
cold water is selected. 

Features (Cont.)

Time and preset indicators

This indicator shows the 
remaining time during washing.

This indicator shows during 
presetting when the washing will 
be finished.

When abnormal conditions occur,  
an error warning will appear here.

When setting soak and wash 
processes, this indicator shows 
the time or water level you set. 

Summary of Contents for STR-WPTL6K

































Reviews:

No comments

Brands by name

Popular brands

Load more brands