background image

24

AUS

AFTER SALES SUPPORT

1300 112 534

tempo.org/support

MODEL: STR-CD70W   PRODUCT CODE: 708644   06/2022

Overheat protection

The dryer has a safety cut-out switch, which shuts down the power supply to the 
unit if the temperature inside the unit is too high. Should you notice that this has 
happened, proceed as follows:
•  Switch off and unplug the dryer and let it cool down for 10 minutes.
•  Check and ensure that the filter is clean and that nothing is obstructing the air inlet 

and ventilation grilles (see “Prevent overheating”, below).

•  Plug in the dryer, switch it on and restart it.
If the dryer still does not work properly, or the problem occurs repeatedly, please 
contact our after sales support centre, or a qualified service technician.

Prevent overheating

•  The most common reason for the dryer to overheat is a blocked lint filter. Check the 

filter and ensure nothing is blocking it – for example, a lightweight item such as a 
handkerchief might have been sucked over the filter. Clean the filter after each drying 
load. Cleaning instructions follow on the next page. 

•  Also ensure that the air intake filter and any ventilation openings are clean and 

free of obstructions. Use a cloth, soft brush or the brush attachment of a vacuum 
cleaner to clean the openings.

•  Other reasons for the dryer to overheat include poor ventilation in the laundry – 

make sure you have a window or door open when you are using the clothes dryer, 
and that the vent tube is installed correctly. 

Service required

The dryer requires maintenance in the following circumstances:
•  if the dryer can be operated while the door of the appliance is open
•  if the dryer can be operated without pressing the START/PAUSE button.
Should this happen, please contact our after sales support centre and arrange for a 
service.

Problem

 Possible cause 

Solution

Drying process 
stops soon 
after starting; 
the “End” light 
is illuminated.

Is there not enough laundry in the 
dryer?
Is the washing too dry for the 
selected program?

Wait until a fuller load can be 
added to the dryer.
Select a higher drying level.

Drying takes 
an unusually 
long time.

Is there too much laundry in the 
dryer?

Reduce the load volume. 

FAQs and Troubleshooting Guide (Cont.)

Summary of Contents for STR-CD70W

































Reviews: