background image

EN

1

English

Contents

Installation, 2

Where to install the tumble dryer
Ventilation
Electrical connections

Levelling the tumble dryer

Preliminary information

Warnings, 4

General safety
Saving energy and respecting the environment

Care and maintenance, 6

Disconnecting the power supply
Cleaning the filter after each cycle  
Checking the drum after each cycle
Emptying the water container after each cycle
Cleaning the Heat Pump Filter
Cleaning the tumble dryer

Description of the tumble dryer, 8

Features
Control panel

How to carry out a drying cycle, 9

Starting and selecting a programme

Programmes and options, 10

Programme chart
Special programmes
Options
Opening the door

Laundry, 13

Sorting laundry
Care labels
Drying times

Troubleshooting, 15
Assistance, 16

Information on recycling and disposal
Spare parts

EN

IDPE 845 A1 ECO

Instruction manual

TUMBLE DRYER

!

 

 This symbol reminds you to read this 

instruction manual.

!

 

Keep this manual at hand for immediate reference whenever 

necessary. Always store this manual close to the tumble dryer and 
remember to pass it on to any new owners when selling or tran-
sferring the appliance, so they may familiarise with the warnings 
and suggestions herein contained.  

!

 

Read these instructions carefully: the following pages contain 

important information on installation and useful suggestions for 
operating the appliance. 

www.indesit.com

Summary of Contents for IDPE 845 A1 ECO

















Reviews: