12
MODEL: SCC6T | PRODUCT CODE: 53592 | 06/2016
Installation Cont.
Connecting the cooktop to the mains power supply
The power supply should be connected in compliance with the relevant standard, or a
single-pole circuit breaker. The method of connection is shown below in Fig. 7.
• If the cable is damaged or needs replacing, this should be done by an after-sales technician using the
proper tools, so as to avoid any accidents.
• If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker must be
installed with a minimum gap of 3mm between the contacts.
• The installer must ensure that the correct electrical connection has been made and that it complies with
safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and only replaced by a properly qualifi ed person.
Technical Specifi cation
Cooktop
SCC6T
Cooking Zones
4 Zones
Supply Voltage
220–240V~ 50/60Hz
Installed Electric Power
5500-6600W
Product Size D×W×H(mm)
590×520×55
Building-in Dimensions A×B(mm)
560×490
The 60cm ceramic cooktop has been fully tested and meets all requirements as set out by the below testing
standards:
AS/NZS 60335.1 | AS/NZS 60335.2.6
Fig. 7
