background image

7

General Safety Instructions (Cont.)

•    Do not overfill 

the kettle to avoid splattering and ejection of boiling water. 

Make sure the water level is between the minimum and maximum levels. 

•     Spout: 

Position the kettle so the spout is directed away from you.

•     Filter:

 The filter is built into the lid and cannot be removed. Do not operate the 

kettle without the lid fitted.  

•    Before switching on

make sure the kettle is located properly on the power 

base and the lid is securely closed, otherwise it may not switch off.

•     Unattended: 

Do not leave the kettle unattended when the power is turned on.

•    

CAUTION: 

Ensure the kettle is switched off before removing it from the base. 

Do not move the appliance while it is switched on.

•     Disconnect: 

Always unplug the kettle from the outlet when it is not in use. To 

disconnect, turn off the power at the outlet, then remove the plug from the wall. 
Grip the plug when disconnecting, do not pull the cord.

•    

CAUTION:

 

Unplug the kettle and allow it to cool before cleaning and mainte-

nance. To prevent damage to the appliance, do not use abrasive or alkaline 
cleaning agents when cleaning. Use a soft cloth and a mild detergent.

•    

Cleaning:

 Rinse the inside of the kettle regularly and descale the appliance 

when necessary. Refer to page 12 for comprehensive descaling instructions.

CAUTION: HOT SURFACES!

•    Kettle surfaces: 

Do not touch any part of the kettle housing when it is in use. 

The surfaces get hot. Only touch the handle. Do not put any part of your hand 
or body near the kettle when it is turned on.

•    Residual heat: 

Take care when handling the kettle after use. The inside surface 

which conceals the heating element is subject to residual heat after use. Water 
can also remain hot for a considerable time after boiling and can present a 
scald hazard. 

•    

WARNING: 

Do not remove the lid while the water is boiling. Keep the lid closed 

while the water is boiling and straight afterwards. Scalding may occur if the lid 
is removed while the water is heating up. Be careful when opening the lid for 
refilling when the kettle is hot.

•     Steam: 

While water is boiling, or just after the water has finished boiling, avoid 

contact with the steam from the spout.

•    Hot water: 

Use extreme caution when moving the kettle containing hot water. 

Always take care when pouring hot water. Tilt the kettle slowly and carefully 
without tipping it too fast.

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: JK-149-WHT   PRODUCT CODE:  63379    12/2018

Summary of Contents for JK-149-WHT

















Reviews: