9
Before first use
• Packaging:
This product has been packaged to protect it against transportation
damage. Unpack the appliance and keep the original packaging carton and
materials in a safe place. It will help prevent any damage if the product needs
to be transported in the future, and you can use it to store the appliance when it
is not in use. In the event that the carton is to be disposed of, please recycle all
packaging materials where possible.
Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach and disposed of safely.
• Cord:
Unwind the power supply cord to its full length and inspect the cord
and plug for damage.
Inspect all other parts of the appliance for visual damage.
Do not use the appliance if anything appears to be damaged or not working
properly.
In case of damage, contact our after sales support centre.
• Documentation:
Make sure you have read and understood all instructions and
warnings in this manual. Refer to the Product Overview, opposite, to familiarise
yourself with the product and identify all parts. Pay particular attention to the
safety instructions on the previous pages.
• Preliminary use:
Place the kettle on a stable, dry and level work surface, away
from the edge. Make sure the ON/OFF switch is in the OFF position (up). In
order to ensure that dust and oils left from the manufacturing process and
transport are removed, boil some water a few times before using the kettle.
Lift the kettle vertically off the power base and remove the lid: grip it by the lid
knob and pull it straight up.
Fill the kettle with cold water. When replacing the lid, press it down firmly and
make sure the in-built filter sits behind the spout and the two cut-outs in the
lid fit over the two protrusions on the edge of the kettle.
Replace the kettle on the power base, switch it on and boil the water, then
discard the water (detailed usage instructions are provided on page 10).
Repeat this procedure twice before using the kettle to boil water for
consumption.
Getting Started
Boil-dry protection
The kettle has an automatic shut-off feature that shuts down power to
the kettle if it is empty, preventing accidental operation without water.
Once this safety feature has been activated, unplug the kettle and let it cool
(for at least 15 minutes) so the fail-safe device will reset itself.
Then fill the kettle with cold water and use it as normal.
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: JK-149-WHT PRODUCT CODE: 63379 12/2018
