background image

7

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: EPI208   PRODUCT CODE: 63676   01/2019

General Safety Instructions (Cont.)

•    

Handle with care: 

Do not shake the appliance vigorously or drop it from 

an elevation. Doing so will damage the product or shorten its lifespan.  

Do not sit or stand on the appliance, which may lead to potential injury. 

•    

Location: 

Always place the air purifier on a dry, stable, level and horizontal 

surface. Do not use the appliance near appliances that get hot during use, 

such as heaters, ovens or fireplaces.

•    

Clearances:

 Make sure there is at least a 15cm clearance from any walls  

and 1m from any heat sources such as stoves, radiators, or heaters. 

•    

Moving the appliance: 

When moving the air purifier, always turn it off 

first and disconnect the power supply, and move it slowly. Keep the unit 
upward during transport and storage.

•    

Liability: 

We assume no responsibility for any eventual damages caused 

by improper installation, faulty use or failure to follow the instructions in 
this manual.

Cleaning and maintenance

•     Disconnect: 

Make sure the appliance is disconnected from the power 

supply when it will not be used for a long time and before carrying out any 

cleaning or maintenance.  

•    

Service:

 The air purifier has no user-serviceable parts contained inside. Do 

not attempt to disassemble, modify or conduct repairs on this unit. It has 

been built in accordance with relevant safety and performance standards. 

An electrical specialist must carry out all repairs. If the appliance requires 

service, please contact our after sales support centre.

•    

Cleaning:

 Clean the outside of the unit once a month using a dry or 

slightly damp cloth (not wet!), or use a soft brush attachment of a vacuum 

cleaner. Never use water, wax, polish, or any other chemical solution to 

clean the outside of the unit. Never use water or any household cleaners 

or detergents to clean the HEPA or carbon filters (only the prefilter made of 

sponge material is washable).

 

Under normal usage conditions, replace the 

HEPA filter every 3 months and the carbon filter every 6 months.

Summary of Contents for EPI208





















Reviews: