12
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: EPI208 PRODUCT CODE: 63676 01/2019
Using the air purifier
Connecting the appliance
• Plug the appliance into a properly earthed 220–240V~ 50Hz mains socket
and switch on power to the outlet. All indicators will turn on with a beep
sound for 2 seconds and then turn off.
• Press the POWER
button to run the unit in Auto (default) mode. The
appliance will start up and on the control panel, the power, Auto mode
and fan speed indicator lights will turn on. At the front panel, the air quality
indicator light will also illuminate.
• Press the POWER button in any normal mode of operation and the appliance
will be shut down to standby mode.
NOTE:
If you open the front cover when the unit is operating, the machine
will shut down automatically and the power light flashes.
Air quality status
When the appliance is switched on, the air quality sensors inside the appliance
assess the air quality and, after a short while, display the colour that
corresponds to the current ambient air quality on the front panel.
Green = good
Blue = average
Red = poor
Auto mode
When the appliance is operating in Auto mode (and the auto mode indicator is
illuminated), the air purifier automatically controls the fan speed based on the
air quality. You can change the fan speed or operating mode by pressing the
SPEED/MODE button, repeatedly.
Fig. 6
Instructions
