14
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: AP230 PRODUCT CODE: 702580 09/2020
Instructions (Cont.)
Air quality status
When the appliance is switched on, the air quality sensors inside the
appliance assess the air quality and, after a short while, display the colour that
corresponds to the current ambient air quality.
The PM2.5 indicator illuminates:
• green
when the air quality is good
• orange
when the air quality is average
• red
when the air quality is poor.
NOTE:
PM2.5 refers to inhalable particles: particulate matter with a diameter
of less than 2.5 micrometers, which can only be detected with an electron
microscope. (For reference, the average human hair is about 70 micrometers in
diameter.)
Filter indicator
The air purifier has a filter indicator built in that automatically counts the usage
time and reminds you when the filters need to be cleaned or replaced.
When you start the machine, the filter indicator begins counting the hours of
usage. It will stop counting when the appliance is shut down or is in standby
mode and resume counting when you switch it on again.
When the filter indicator has counted a total of 3000 hours, the Filter indicator
will start flashing to alert you to clean or replace the filters.
• Please refer to page 16 for instructions how to clean the filters, or to page 17
for how to purchase replacement filters.
• To clear the accumulated time after you have cleaned or replaced the filters,
press and hold the ION button for three seconds and the timer will reset from
the beginning.
