9
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: AP230 PRODUCT CODE: 702580 09/2020
Product Overview (Cont.)
Control panel
A POWER
button (and indicator): press to turn the unit on/off.
B FAN
button
*
Press to choose the fan speed options: turbo, high, mid, low — the
respective indicator light will illuminate.
* Press and hold for 3 seconds to enter automatic (Auto) mode, and then
press the button again to exit automatic mode.
NOTE:
In Auto mode, the purifier automatically adjusts the purification
level based on the sensor’s detection data (dust concentration).
C TIMER
button: press to select the off-timer period: 1 hour, 2 hours,
4 hours or 8 hours — the respective indicator light will illuminate.
D SLEEP
button (and separate indicator): press to turn the sleep mode on/
off — the respective indicator light will illuminate.
E ION
button (and separate indicator): press to turn the anion function on/
off — the respective indicator light will illuminate.
F Filter
indicator: the filter indicator will flash when it is time for you to
clean or replace the filters. After you have replaced the filters, press and
hold the
ION
button for 3 seconds and the counter will reset from the
beginning.
G PM2.5
indicator: the air quality indicator illuminates
green
when the air
quality is good,
orange
when it is average and
red
when it is poor.
A
B
C
D
E
Fig. 3
F
G
