8
Referencing FIG A at right:
1. Connect the HEIGH10 16 Pin wires to the Honda 17 Pin Vehicle Plug
color-for-color... White to White, White/Black to White/Black, etc.
2. Cap-off/insulate the HEIGH10 16 Pin Blue/White wire. This wire will not be
used.
3. Connect the HEIGH10 16 Pin Blue wire to the Blue wire on the H06 Antenna
Adapter
4. Pink Wire: Connect the Pink Extension Wire provided. The other end of the
Pink lead will be connected in the vehicle.
5. Optional Green/White Wire: If adding a rear camera, connect the Green
Extension Wire provided. The other end of the Green lead will be connected in
the vehicle. Cap-off/insulate if not using.
6. Optional Blue Speed Sense Wire: If adding a front camera or adding HEIGH10
Navigation Card, connect the Blue Extension Wire provided to the Blue wire
labeled SPEED on the HEIGH10 10 Pin Multi Camera Harness. The other end of
the Blue lead will be connected in the vehicle. Cap-off/insulate if not using.
Connect and insulate all connections either by using insulated crimp caps or by
soldering connection points and insulating with electrical tape or heat shrink.
Any unused wire ends should be insulated.
Wire Connections
Parts Needed:
H06 Antenna Adapter
HWH812 Honda 17-Pin Vehicle Plug
Pink, Green, Blue Extension Wires
From the HEIGH10 Box:
16-Pin Power / Speaker Harness
10-Pin Multi Camera Harness (Optional, See 6 below)
* Refer to pages 18-20 in the HEIGH10 Installation Guide for harness names and illustrations
Summary of Contents for HEIGH10 STH10CIV
Page 23: ...23...
