SRK-JW18EH PAC Integration Kit
Jeep Wrangler JL | Gladiator JT
12
®
®
Camera Presets
Camera Preset: Front
The Front preset will activate a camera
whenever the vehicle is shifted into Drive
and by steering wheel rotation (when
Camera Park Assist is enabled).
Max Duration (Sec) [5–10–15]
Sets duration, in seconds, that camera
will be active when triggered.
Max Speed Threshold (MPH) [5–10–15]
Sets speed threshold for camera deactivation.
Parking Steering Angle [30°–60°–90
°
]
Sets steering wheel rotation for activating
the camera when Park Assist is selected in the
User Camera source.
Camera Preset: Rear
By default, Camera 1 is set to Rear
and uses reverse gear as the trigger.
These settings are not editable. The
rear camera will overide any other
active camera, unless manually
deactivated.
If there is not a rear camera installed,
the reverse trigger can be shut off in
the User Camera Settings.
Camera Preset: Left / Right
Activates left or right camera whenever
the turn signal is active.
Low Speed Override [ON-OFF]
When set to ON, camera will only trigger
when vehicle speed is over 3 MPH and
automatically shut off an active camera
when vehicle speed falls below 3 MPH.
The settings shown above will activate the Right
Camera for as long as the turn signal is active
and vehicle speed is over 3 MPH.
The settings shown above will activate a Front
camera, when shifted into Drive, for 10 seconds or
when vehicle speed reaches 10mph. If Park Assist
is active, the Front camera will activate whenever
steering wheel rotation is 60
°
or more.
