11
SRK-RAM13H PAC Integration Kit |
RAM Truck
The SRK-RAM13H allows retention of the factory rear camera and factory cargo camera if
equipped. Up to four cameras may be added with a variety of trigger options. Camera 1
corresponds to the
REVERSE CAMERA IN
RCA input, and Cameras 2, 3, 4 correspond to
CAMERA 2, CAMERA 3 and CAMERA 4
inputs on the HEIGH10.
Installer Camera Settings
To view or change the camera settings, select
Advanced Vehicle Settings > Camera Settings
from the Installer Settings.
The Installer Camera Settings menu will display
which cameras are active and camera location.
Selecting any camera from the menu will bring
up the corresponding Camera Settings page.
From the individual Camera Settings page,
Camera Presets can be assigned and trigger
parameters can be edited.
Selecting Bed will activate and label Camera 2
as a Bed (Cargo) camera. Use the Back arrow
to edit any available trigger options.
Disabling a Camera Preset trigger(s) is done in
the User Camera Settings. Users can manually
activate camera(s) and access certain settings
when selecting the Camera source in the user
interface.
For example, to bypass the turn signals activating
the Bed camera is done in User Camera Settings.
NOTE:
