State: 26.08.2021 p. 7
Mounting instructions for multiplay „gravis 4B“
Item-No. 51 5519 442
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • All rights and product modifications reserved
13. Place the base plate of the climbing net onto the foundation and connect the
climbing net (diagram 5a) with the tower at the intended locations acc. to
diagram 1 and 6b. Please fasten the parts using the shackles included in the
delivery.
14. Align the play equipment once more on the foundations, so that the wobble
bridges do not sag too much.
Note:
The climbing net should be placed with tension to avoid droop.
15. Drill holes into all foundations and screw the play equipment to the founda-
tions with the included heavy-duty dowels.
16. Cover the entire impact area with fall protection according to the required
drop height in accordance with EN 1176-1.
Critical drop height: max. 2200 mm
Recommended surface material: sand, wood chips, gravel, synth. impact
protection.
17. Do not allow children to use the equipment before the installation has been
finished.
Attention:
If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
NOTE:
Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are fine to remove with an
abrasive (240 grit).
Please take care when transporting and setting up the fact that the components are
made of stainless steel with no „normal“ steel parts in contact.
In order to preserve a good visual appearance of your stilum playground equipment
over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance. Especially areas, which can not
be reached by rainfall, should be frequently cleaned from dirt and deposits due to air
pollution and dirt caused by the atmosphere. Light soiling can easily be removed by
using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner
(e.g. on phosphoric acid) and rinse off with clear water after a short application time.
During cleaning with mild abrasive components, only wipe over stainless steel sur-
face in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on cars)
or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl alcohol,
isopropyl alcohol or acetone). However, it should be noted that the dissolved soiling
is not spread over the surface again.
Do not use any chloride or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type and
degree of soiling as well as on demands made on optical characteristics. Therefore
cleaning is advisable at intervals of six to twelve months – whereby in
the case of strong soiling it is appropriate to clean the playground equipment at inter-
vals of three to six months.
