Still MX-X, Original Instructions Manual

Page: 119 / 132

Special equipment
7
Telescopic table
Interface X99
The plug X99 represents the interface be-
tween the truck control unit and the personal
protection system. All signals defined by us
are allocated in this plug. The scope of deliv-
ery of a very narrow aisle truck includes the
bridging plug X99, which can be fitted instead
of the MPSE connector plug if an internal de-
fect in the MPSE controller has caused truck
failure.
The interface X99 is installed on man-down
trucks in the vicinity of the operating panel and
on man-up trucks in the control compartment
CAUTION
Risk of accident
With a fitted bridging plug, all safety functions
of the MPSE are suspended and the maximum
driving speed of the truck is restricted to 2.5km/h.
Operation with a bridging plug is therefore only
permitted for the retrieval of a truck. This bridging
plug must be kept locked away by the warehouse
manager responsible and is only to be used under
his instruction.
Telescopic table
Description
NOTE
To ensure proper use, the information in the
enclosed manufacturer's documents must be
observed.
The table unit is made up of two telescopic fork
arms, connected by a mechanical coupling,
and possibly a third fork, which is connected
via a universal drive shaft and an electromag-
net disc coupling.
Each fork consists of a top table, middle table
and lower table as well as a drive gearbox.
The extending table profiles have a width of
180 mm and a height of only 60 mm (top and
middle part). The drive of the top and middle
profile is powered via a chain system.
5231 804 2502 EN - 11/2017 113