Still MX-X, Original Instructions Manual, Page: 114 / 132

7
Special equipment
Safe handling of the traction battery
80-V version
WARNING
In the 80-V version, there is risk of electric shock if
the live connections are touched.
Before removing the control compartment cover
or the battery compartment cover, disconnect the
battery male connector.
Handling the battery
The installation, removal and transport of
traction batteries always involves the handling
of heavy weights.
WARNING
Risk of crushing of fingers, risk of crushing of hands
and feet, risk of damage to property
• When heavy weights are being handled,
there is a risk of limbs or bodies becoming
trapped or crushed. To avoid this, operate
lifting gears and changeover frames with
the utmost care. Prevent heavy weights
from bumping against the machine or
equipment.
• Be aware of pinch points and shear points
when inserting the battery into or removing
the battery from the battery compartment.
Ensure that you keep your fingers, hands
and feet out of any areas where they could
be at risk from one of the abovementioned
points of constriction. These points of
constriction occur regardless of the tool
being used (truck, crane or changeover
frame).
• Provide support staff with accurate instruc-
tions.
• Remove passers-by and spectators from
the danger area.
• Set down the disconnected battery cable on
the battery in such a way that prevents the
cable from becoming trapped or torn off.
108 5231 804 2502 EN - 11/2017