Still GX-Q, Original Instructions Manual

Page: 87 / 100

Optional Equipment
7
Attachments
NOTE
The fork arm positioner can only be actuated
without a load on the fork.
Programming the intermediate stop
As an option, an intermediate stop* can be
programmed within the adjustment range.
– Actuate the fork adjustment.
– During the movement, actuate the ESC
button at the desired position.
This position is stored. From now on, the fork
adjustment will stop at this position for opening
and closing. The movement is resumed when
the function is actuated again.
To delete the stop position, actuate the ESC
button again during the movement.
Attachments
NOTE
Due to their weight and size, some attach-
ments can have an adverse effect on the
stability of the conveyor truck. Consult your
authorised dealer, therefore, to make sure
that the proposed attachment is permitted, or
arrange for him to procure and fit it.
In principle, it is possible to mount an attach-
ment to this truck. To ensure that it is safe to
operate, note the following points without fail:
• The existing load bearing diagram for the
vehicle in standard configuration ceases
to be applicable. A new diagram must be
drawn up, taking account of the unladen
weight of the attachment and its distance
from the centre of gravity of the load.
• If the attachment can be used as an alter-
native to the standard forks, load bearing
diagrams for both configurations must be
affixed to the truck.
• If the attachment is connected to the
vehicle’s hydraulic system, the requisite
parameters, speeds and pressures must be
adjusted accordingly.
5220 804 2501 [EN] 81