4
Operation
Emergency operation
NOTE
Ensure that the fork arrest mechanism is
always latched in place and that the lateral
fork safeguard (2) is mounted and in correct
working order. Otherwise the fork could be
pushed off the load carriage as a result of
lateral forces and fall to the ground.
* Option
Parking and leaving the truck
NOTE
It is the operator’s duty to remove the ignition
key when he leaves the truck, thus securing
the truck against unauthorised use. If the
truck is equipped with an electronic access
control, it must be reset and/or the device for
controlling access must be removed. Where
possible, the truck should be parked at the
start of a racking aisle or in a loading bay. If
there are parking spaces, the truck must be
parked there. The fork is to be lowered to the
floor as far as possible, and if there is one, the
tilt attachment must tilt towards the floor to
reduce the risk of stumbling.
Emergency operation
Emergency operation
In the event of a failure of a component or of
the complete vehicle control system, the truck
can be moved out of the work area by using
the emergency operation function.
NOTE
•
When towing, never drive above creep
speed.
•
There must always be a driver in the towed
vehicle.
•
Completely clear the danger area around
the towing and towed vehicle of any person-
nel.
54
5220 804 2501 [EN]
Summary of Contents for GX-Q
