Still EXU-S 22 Original Instructions Manual Download Page 82

Page: 82 / 122

Application

Digicode

456

PRG

1044_505-009

– Press the

(ON) button (5).

– Enter the valid 4-digit master code with the

buttons

123

(1),

456

(2) and

789

(3).

1044_505-010

– Scroll with the

PRG ↑

(scrolling) button (6)

until

(7) appears in the display.

1044_505-015

– Conﬁrm with the

PRG ↲

(enter) button (4)

until

dEL

(10) appears in the display.

1044_505-012

– Conﬁrm with the

PRG ↲

(enter) button (4).

A ﬂashing line cursor (8) will appear in the

display.

– Enter the 4-digit master code to be deleted

with the buttons (1), (2) or (3) as described

above.

NOTE

If one attempts to delete an erroneous master

code,

Err

will appear in the display. If only

one master code remains,

None

will appear in

the display.

50018043464 EN - 10/2017

Summary of Contents for EXU-S 22



























































































































Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands

Still EXU-S 22, Original Instructions Manual

Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands