Still EXU-S 22 Original Instructions Manual Download Page 66

Page: 66 / 122

Application

Driving

456

PRG

1044_50

-001

Selecting the driving mode

NOTE

The pallet truck has 2 selectable driving

modes.

– For normal travel, push the

Hare

button (3).

– To drive with gentle accelerations, push the

Tortoise

button (2).

NOTE

The travel control (4) and (5) can be operated

with both the left and the right hand. Always

operate the travel control slowly to avoid jerky

starting, braking or reverslng.

Steering

0148_003-017

The truck is steered by turning the cockpit in

range (1).
The turning radius (Wa) depends on the fork

length and the battery. (See ⇒ Chapter "VDI

data sheet for standard EXU-S 22", P. 6-101)

Brakes

WARNING

The surface ﬁnish inﬂuences the driving and bra-

king behaviour of the truck.
Therefore take this into account when driving and

braking (eg: wet ﬂoor).

50018043464 EN - 10/2017

Summary of Contents for EXU-S 22



























































































































Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands

Still EXU-S 22, Original Instructions Manual

Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands