Still EXU-S 22 Original Instructions Manual Download Page 56

Page: 56 / 122

Application

Start-up

1044_505-017

– The digit will be deleted and the ﬂashing line

(9) will reappear. It is now possible to enter

digits again.

– After the fourth digit has been entered,

conﬁrm this code by pressing

PRG ↲

(5).

The name of the truck manufacturer is

displayed. It is now possible to activate

the truck.

NOTE

If an error code is displayed, e.g.

E380

(10),

stop the truck by pressing the key (6) and carry

out the activation procedure again.

NOTE

It is possible to show the following displays by

repeatedly depressing the

PRG ↑

key (scroll)

(7).

• Hour meter ⇒ Chapter "Hour meter", P. 4-49
• Battery charging ⇒ Chapter "Battery

charge", P. 4-49

• Servicing interval management ⇒ Chap-

ter "Display of time to next servic-

ing", P. 4-50

456

PRG

1044_505-001

Starting with FleetManager (op-

tional)

– Push the

key (START) (6). Do not pay

attention to the

Code

alert that appears in

the display

– Start the truck directly via the FleetManager

keyboard or reading device, depending on

the version.

50018043464 EN - 10/2017

Summary of Contents for EXU-S 22



























































































































Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands

Still EXU-S 22, Original Instructions Manual

Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands