Still EXU-S 22 Original Instructions Manual Download Page 70

Page: 70 / 122

Application

Load placement

Safety regulations when handing loads

DANGER

Wear protective footwear.

CAUTION

Transporting passengers is strictly prohibited.

DANGER

Before picking up the load, make sure that its di-

mensions and weight fall within the truck speciﬁ-

cations, as indicated in the "TECHNICAL DATA"

chapter.

DANGER

The loads must be arranged so that they cannot

slip or overturn and fall to the ground. In order to

guarantee load stability, make sure that the load is

balanced and centred on the forks.

CAUTION

Make sure that nobody stands in the truck's area of

operation.

DANGER

Risk of injury and crushing for the operator and for

any pedestrians! Risk of damage to the truck and

the goods
During movement of the truck and the loads, espe-

cially in reverse gear, be careful not to hit any obst-

acles. You must maintain an adequate safety di-

stance from obstacles (e.g. other pallets, protru-

ding objects, shelving, pedestrians, other trucks in

transit etc.).

DANGER

Risk of injury and crushing for the operator!
The operator must always remain inside the enve-

lope of the truck.

NOTE

Further information on the general rules of

truck use and picking up and depositing loads

is provided in the "Safety Regulations for

Industrial Forklift Use" manual attached to

this manual.

50018043464 EN - 10/2017

Summary of Contents for EXU-S 22



























































































































Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands

Still EXU-S 22, Original Instructions Manual

Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands