Still EXU-16, Original Instructions Manual

Page: 98 / 132

1000-hour/annual maintenance plan
Maintenance operations every 1000 hours
Depending on the application, environmental conditions and driving style, the following proce-
dures should be carried out every 1000, 2000, 4000, 7000 and 8000 hours
Preparatory tasks
Clean the truck (if necessary)
Check the error codes (using the diagnostic tool)
Traction motor
Check that the cables and bundling are in good condition
Transmission
Check for any possible oil leaks from the transmission gear
Lubricate the ring gear
Steering/Wheels/Braking
Check the wear on the tyre tread of the wheels
Check the brake air gap
Check that the nuts are tight
Electrical equipment
Clean and blow out the electrical plate
Check the mounting of the electrical connections
Check and adjust the battery electrolyte level
Check the condition and mounting of the battery cables
Hydraulic system
Check the system oil level
Check the system for leaks
Load lift system
Check the level of wear on the rings and clevis pins
Oil or generously grease the rings and clevis pins
Final tasks
Check the general condition of the forks and the chassis
Maintenance
5
1000-hour/annual maintenance plan
90 1152 807 80 01 EN - 02/2021 - 17