manualshive.com logo in svg

Still EXH-S 20, Original Instructions Manual, Page: 79 / 132

Share
Download
Still EXH-S 20 Original Instructions Manual Download Page 79

–

Ensure that the battery hood is closed se-

curely.

 CAUTION

Risk of sparks
Never drive with the hood open or incorrectly closed.

Charging the battery using an exter-

nal charger 

 CAUTION

Deep discharging may damage the battery.

–

Charge the battery immediately.

The fixed socket on the truck (1) is located

above the battery and under the battery hood.

–

Park the truck safely.

–

Before charging, check the condition of the

battery cable and the charger cable. Re-

place them if necessary.

–

Open the hood and leave it open.

–

Pull the handle of the battery connector (2)

to disconnect it from the fixed socket on the

truck (1).

–

Connect the battery connector to the wall-

mounted connector.

 WARNING

Electrical risk
Only unplug the battery connector from the battery

charger when both the battery charger and the truck

are switched off.

 NOTE

Follow the instructions provided by the manu-

facturer of the battery and the battery charger

(equalising charge).

Use

4

Handling the battery

 69

11538011751 EN - 02/2021  -  03

Summary of Contents for EXH-S 20





































































































































Reviews:

No comments