Still EXH-S 20, Original Instructions Manual, Page: 62 / 132

Operating the FleetManager™ option
Description of the FleetManager option
The FleetManager option allows you to control
access to the truck. The option is a fleet man-
agement system.
You can access the system:
●
Either by using a keypad
●
Or by using a reading device for a trans-
ponder or an RFID card
The fleet manager sets the access details via
the web interface. This affects the transponder
cards or PIN codes for the corresponding
trucks. It is possible to change the amount of
time for which the access authorisation is val-
id.
Software is also available.
Additional options:
●
Shock sensor
●
Tools for wireless data management:
▶ GSM
(2)
GPRS
(1)
module with antenna
The options available on the truck are:
●
Access control
●
Access control and shock sensor
●
Access control and GPRS module
●
Access control, shock sensor and GPRS
module
(1)
GPRS: General Packet Radio Service
(2)
GSM: Global System for Mobile Communi-
cation
Shock sensor
This sensor allows you to record the shocks
received by the truck.
If the truck receives a shock, it is possible to
configure a speed reduction.
The fleet manager is the only person who is
able to change certain parameters.
NOTE
Replace the sensor if it is faulty.
GSMGPRS module
The module consists of a GSM modem and an
antenna.
The module allows you to:
●
Access truck information remotely
●
Use geolocation
The data is stored on a server.
Data is transmitted by Bluetooth (default) or by
GSM module (optional).
Use
4
Operating the FleetManager™ option
52 11538011751 EN - 02/2021 - 03