Still EXH-S 20, Original Instructions Manual, Page: 44 / 132

List of checks prior to start-up
WARNING
Damage or other defects on the truck or attachments
(special equipment) can result in accidents.
If damage or other faults are noticed on the truck or
attachments (special equipment) during the following
inspections, do not use the truck until it has been
properly repaired. Do not remove or disable the safe-
ty systems and switches. Do not change the pre-set
values.
Before start-up, ensure that the truck operates
correctly.
To do this, perform the following checks:
–
The load arms must not show any signs of
noticeable damage (for example: bending,
cracks, significant wear).
–
Check that there are no signs of leaking
consumables under the truck.
–
Do not restrict the field of vision. Ensure the
visible area specified by the manufacturer is
observed.
–
Attachment parts (special equipment) must
be properly secured and function according
to their operating instructions.
–
Damaged or missing stickers must be re-
placed in compliance with the marking posi-
tion table.
–
The roller channels must be coated in a
visible layer of grease.
–
The wheels must show no signs of defects
or heavy wear. They must be mounted cor-
rectly.
–
Check that there are no foreign objects that
could hinder the operation of the wheels
and rollers.
–
The warning devices (horn etc.) must work.
–
The battery hood must be closed.
–
Check that the hoods are correctly posi-
tioned.
–
The operator must be qualified to drive the
truck. The operator must be able to reach
the controls and operate them (especially
the anti-crush device). Do not obstruct ac-
cess to the controls.
Please inform your supervisor if you notice
any defects.
Use
4
List of checks prior to start-up
34 11538011751 EN - 02/2021 - 03