manualshive.com logo in svg

Still EXH-S 20, Original Instructions Manual, Page: 45 / 132

Share
Download
Still EXH-S 20 Original Instructions Manual Download Page 45

Starting up 

 NOTE

●

Check that the battery is locked.

–

Check that the battery is connected.

–

Check that the battery compartment hood is

closed and locked correctly.

–

Step onto the driver's platform.

–

Release the emergency off switch (1) if it

has been pressed.

–

Turn the key (2). For models equipped with

an electronic key or the FleetManager™ op-

tion, enter the PIN code.

The display (3) switches on. The truck is ready

for operation. The brake is automatically dis-

engaged.

–

Raise the load arms a few centimetres.

 NOTE

Always adjust your speed to suit the route,

any dangers and the load. Use the truck on

ground that has the correct surface and hard-

ness.

 DANGER

Risk of sparks
Using the truck with the battery hood open is prohibi-

ted.

 WARNING

Risk of accident or loss of load
Driving on slopes steeper than 10% is prohibited due

to braking capacity and stability. The load being

transported could tip over.

Use

4

Starting up

 35

11538011751 EN - 02/2021  -  03

Summary of Contents for EXH-S 20





































































































































Reviews:

No comments