Use
4
Handling the battery
Charging the battery using an
external charger
CAUTION
Deep discharging may damage the battery.
– Charge the battery immediately.
The fixed socket on the truck (1) is located
above the battery and under the battery hood.
– Park the truck safely.
– Before charging, check the condition of
the battery cable and the charger cable.
Replace them if necessary.
– Open the hood and leave it open.
– Pull the handle of the battery connector (2)
to disconnect it from the fixed socket on the
truck (1).
– Connect the battery connector to the
wall-mounted connector.
WARNING
Electrical risk
Only unplug the battery connector from the battery
charger when both the battery charger and the truck
are switched off.
NOTE
Follow the instructions provided by the manu-
facturer of the battery and the battery charger
(equalising charge).
WARNING
Risk of damage, short circuit or explosion.
Do not place any metal objects or tools on the
battery.
Smoking is prohibited.
WARNING
The electrolyte (diluted sulphuric acid) is toxic and
very caustic.
Follow the safety regulations when handling battery
acid.
11638011651 EN - 09/2019
85
Summary of Contents for EXD-SF 20
