Still EXD-SF 20, Original Instructions Manual

Page: 121 / 150

Maintenance
5
1000-hour service plan
1000-hour service plan
Depending on the application, environmental conditions and driving style, the following proce-
dures should be carried out every 1000, 2000, 3000, 4000, 6000, 7000, 8000 and 9000 hours
Preparation
Clean the truck
Check the error codes using the diagnostic tool
Chassis and equipment
Check the condition of the forks
Check the electromagnetic brake and ensure that it is working correctly
Check and grease the hinges
Check the pump motor brooms for wear
Check the transmission gear for noise and leaks
Grease the gears
Check the platform
Check the forklift operator side protection
Wheels
Check the condition and tightness of the wheels
Check the stabilisers
Electrical equipment
Clean the electric steering system and the lifting motors
Check the condition of the cables and the battery sockets and ensure that they are positioned
correctly
Check the electrical insulation between the chassis and the electrical components
Check the electrical insulation between the chassis and the control unit components
Check the fuses
Check the battery acid level and the electrolyte level
Hydraulics
Check the hydraulic oil level
Check the condition of the pipe lines
Check the oil level of the controlled stabilisers
Load lift system
Check the condition and the length of the mast chain
11638011651 EN - 09/2019 111