Still EXD-SF 20, Original Instructions Manual

Page: 127 / 150

Maintenance
5
Steering and wheels
Steering and wheels
Cleaning the pinion gear of the
steering geared motor
– Immobilise the truck.
– Lower the load arms.
– Switch off the ignition and remove the key.
– Press in the emergency off switch.
– Open the battery hood.
– Disconnect the battery connector.
– Remove the hood of the technical compart-
ment.
– Check that the pinion gear and the ring gear
(1) are free from dirt.
– Clean with solvent if necessary, then dry
with compressed air.
CAUTION
Use of compressed air
It is advisable to wear protection goggles and a
mask.
– Then lubricate the pinion and ring gear with
silicone aerosol spray.
– Reconnect the battery connector.
– Return the truck to service.
CAUTION
Risk of dust clogging
There is a risk of dust clogging if non-recommended
products are used for greasing.
CAUTION
Risk of injury
It is advisable to wear gloves when carrying out
maintenance on the pinion and the turntable.
11638011651 EN - 09/2019 117