Operation of the display oper-
ating unit
Managing battery charging
The battery charge level indicator (1) has ten
status bars.
When the battery is fully charged (100%), the
ten status bars are all lit.
As the battery capacity falls, the battery status
bars turn off.
If the charge level falls to 30%, three status
bars remain lit and the battery must be re-
charged. The triangle (2 ) flashes until the bat-
tery is recharged.
If the charge level falls to 20%, only two status
bars remain lit and the performance of the
truck is automatically limited. The triangle (2 )
remains permanently lit until the battery is re-
charged.
Performance modes
See the chapter Drive Modes.
Blue-Q mode
Blue-Q mode (3) ensures that battery con-
sumption is fully optimised.
To activate Blue-Q mode:
–
Press the key (3).
When the key (3) is pressed, Blue-Q mode is
activated. It remains active when the truck is
switched off and on again.
To deactivate Blue-Q mode:
–
Press the key (3) again.
The button turns off and the Blue-Q system is
deactivated.
Tortoise mode
Tortoise mode (2) enables the truck to be driv-
en at creep speed.
To activate Tortue mode:
–
Press the key (2).
Use
4
Operation of the display operating unit
38
11638011751 EN - 02/2021 - 03
Summary of Contents for EXD-S 20
