Still EXD 20 Original Instructions Manual Download Page 61

Page: 61 / 146

Drive program

The indicator light (1) is on during operation of

the truck. The shape of the indicator light indi-

cates the selected program.
The truck is equipped with three different drive

programs:

●

Hare mode (3)

●

BlueQ mode (4)

●

Tortoise mode (2)

NOTE

When the operator restarts the truck, the last

mode selected is automatically activated.

NOTE

The drive program is instantly changed. If the

operator changes mode while driving the

truck, he must remain vigilant.

Hare mode

When Hare mode is selected on the screen,

the truck operates at its maximum perform-

ance.

Blue Q mode

Selecting Blue Q mode allows you to slightly

reduce the performance of the truck:

●

The travel speed of the truck is reduced

(70% of maximum speed)

●

The speed of lifting and lowering the forks is

reduced (90% of maximum speed)

This mode allows you to save battery.

Tortoise mode

Selecting Tortoise mode allows you to reduce

the performance of the truck:

●

The travel speed of the truck is reduced to

6 km/h

●

The speed of lifting and lowering the forks is

considerably reduced

The different speeds can be adjusted. Contact

the After-Sales Service Centre to change

these.



Use

Driving

11638011551 EN - 02/2021 - 06

Summary of Contents for EXD 20



















































































































































Search results

Summary of Contents for EXD 20

Reviews:

Related manuals for EXD 20

Brands by name

Popular brands

Still EXD 20, Original Instructions Manual

Search results

Summary of Contents for EXD 20

Reviews:

Related manuals for EXD 20

Brands by name

Popular brands