Still EXD 20, Original Instructions Manual

Page: 131 / 146

–
Fully lower the mast.
–
Undo the locknut (2)
–
Place the chains under slight tension by
tightening the nut (1).
–
Retighten the locknut (2).
CAUTION
Risk of the equipment becoming worn or damaged.
After this adjustment, check that the fork carriage
does not reach the mechanical stop at the top of the
mast during the maximum lift. If this is the case,
slacken or replace the chains. We recommend that
this operation be carried out by our After-Sales Serv-
ice Centre.
Checking the protective screen
It is important to check the condition of the
mast protective screens and to check that the
mountings are tightened.
–
Check that the protective screen (1) is cor-
rectly attached and in good condition (un-
damaged).
–
Replace the protective screen if it is dam-
aged.
–
Adhere to the number of mountings as de-
fined by the manufacturer.
WARNING
Risk of serious injury and/or serious damage to
equipment
Never touch moving parts and assemblies without
first having lowered the equipment to the ground and
disconnected the battery.


Maintenance
5
Lift mast
121 11638011551 EN - 02/2021 - 06