Still ECU-14 Original Instructions Manual Download

Page: 73 / 98

Use and Operation

Battery

Battery type

Trucks can be ﬁtted with different types of

battery. Observe the instructions on your

battery type plate, as well as the speciﬁcations

deﬁned in the chapter "Technical data".

WARNING

The weight and size of the battery inﬂuence the

stability of the truck.
The new battery must weigh the same as the old

one. Do not change its position from the original

one.

CAUTION

Be careful not to damage any wiring when replacing

the battery.

Preparation

Maintenance personnel

The battery may only be changed by spe-

cially trained personnel, in accordance with

the manufacturer’s instructions for the battery,

the battery charger and the truck. The main-

tenance instructions for the battery must be

observed.

Fire prevention measures

WARNING

Do not smoke or use a naked ﬂame

when handling batteries. In the

area designated for parking the

truck to recharge the battery or

battery charger, there should be no

ﬂammable materials or substances

that can cause sparks within a radius

of at least 2 metres. The charging

area must be well ventilated. Keep a

ﬁre extinguisher at hand.

Safe parking

Park the truck securely before carrying out

work on the battery. The truck can only be

operated when the battery cover is closed

45588043482 EN - 04/2016

Summary of Contents for ECU-14



































































































Search results

Summary of Contents for ECU-14

Reviews:

Related manuals for ECU-14

Brands by name

Popular brands

Still ECU-14, Original Instructions Manual

Search results

Summary of Contents for ECU-14

Reviews:

Related manuals for ECU-14

Brands by name

Popular brands