Still ECU-14, Original Instructions Manual

Page: 51 / 98

Use and Operation
4
Breaking-In
1
2
OM1773
Loading and unloading the truck
Use a lifting crane to load and unload the truck,
or use an inclined plane or a movable platform
with a slope and structural strength compatible
with the truck’s performance and weight (see
"Technical Data" chapter).
DANGER
Use a crane with a suitable lifting capacity for the
weight of the truck, indicated on its designation
plate. Also take into account the weight of the
mounted battery (if applicable), consulting the
relevant designation plate. The lifting operations
must be performed by qualified personnel. DO
NOT stand within the crane’s radius of action or
near the truck. Use NON METALLIC slings. Make
sure that the lifting capacity of the slings is suitable
for the weight of the truck.
To lift the truck:
• Manually raise the battery cover
• Insert the sling hooks (1) in the appropriate
points (2). The sling and hook must have an
adequate capacity for the load to be lifted.
• Connect the other end of the slings to the
hook of a crane.
DANGER
It is prohibited to use any other method for lifting
and transporting the truck.
Do not stand in the hazard area beneath suspended
loads
Breaking-In
This type of forklift does not require special
breaking-in operations.
45588043482 EN - 04/2016 45