Still ECU-14 Original Instructions Manual Download Page 62

Page: 62 / 98

Use and Operation

Load Placement

Safety guidelines for handling loads

DANGER

Wear protective footwear. Always keep a suitable

distance between your feet and the truck.
Risk of crushing feet when manoeuvring the truck.

CAUTION

The transport of persons or passengers is strictly

prohibited.

DANGER

Before picking up the load, make sure that its di-

mensions and weight fall within the truck speciﬁ-

cations, as indicated in the "TECHNICAL DATA"

chapter.

DANGER

The loads must be arranged so that they cannot

slip or overturn and fall to the ground. In order to

guarantee load stability, make sure that the load is

balanced and centred on the forks.

CAUTION

Make sure that nobody is standing in the truck’s

area of operation.

NOTE

Further information on the general rules of

truck use and taking up and depositing loads

is provided in the "Safety Regulations for

Industrial Forklift Use" manual attached to

this manual.

45588043482 EN - 04/2016

Summary of Contents for ECU-14



































































































Search results

Summary of Contents for ECU-14

Reviews:

Related manuals for ECU-14

Brands by name

Popular brands

Still ECU-14, Original Instructions Manual

Search results

Summary of Contents for ECU-14

Reviews:

Related manuals for ECU-14

Brands by name

Popular brands