Still ECH 12, Original Instructions Manual

Page: 90 / 110

General servicing information
General
The following instructions contain all the infor-
mation required for servicing your truck. Carry
out the various maintenance work in compli-
ance with the maintenance plan. This will en-
sure that your truck is reliable and in good
working order and that the warranty remains
valid.
Maintenance should only be carried out by au-
thorised technicians, or by authorised dealers
in accordance with a signed maintenance con-
tract.
Modifying or installing additional equipment on
the forklift truck is prohibited without the
agreement of the manufacturer.
NOTE
If the data plates or affixed labels are incom-
plete or damaged, they should be replaced
with new ones. For locations and reference
numbers, please see the spare parts cata-
logue.
CAUTION
If the forklift truck is used in an extreme environment
(such as excessive heat, excessive cold or areas
with high dust concentrations), the time intervals giv-
en in the maintenance tables should be reduced ac-
cordingly.
ENVIRONMENT NOTE
Please comply with regulations regarding the
use, handling and disposal of fuel and lubricat-
ing oil.
The forklift must undergo functional testing
and a trial run after each inspection.
Service plan
Maintenance work must be carried out accord-
ing to the maintenance checklist.
The service plan is followed by advice to facili-
tate work.
Maintenance intervals must be reduced if the
truck is used under harsh conditions (extreme
heat or extreme cold, large quantities of dust).
Grade and quantity of lubricants and
other consumables
Only lubricants and other consumables speci-
fied in these operating instructions are author-
ised for use during maintenance work.
Lubricants and other consumables required
for truck maintenance are listed in the mainte-
nance specifications table.
Never mix different qualities of grease or oil. If
it is absolutely necessary to change brands,
make sure to flush thoroughly beforehand.
Before changing any filters or working on the
hydraulic system, thoroughly clean the surface
and the areas around the part.
All containers used to pour oil must be clean.
Servicing and maintenance personnel training and qualification
Truck maintenance must only be carried out
by qualified and authorised personnel.
The annual inspection for prevention of acci-
dents at work must be carried out by a person
qualified to do so. The person carrying out this
inspection must provide their expertise and
opinion without being influenced by economic
factors or company internal issues. Safety is
the only critical deciding factor.
The person responsible for carrying out the in-
spection must have sufficient knowledge and
experience to be able to assess the condition
Maintenance
5
General servicing information
82 5001 801 1505 EN - 12/2019