Stihl TS 410, Instruction Manual

Page: 26 / 40

Versions with decompression valve
5
370BA101 KN
► Press the button (5) of the decompression
valve before each starting procedure
For all versions
6
370BA102 KN
► Press the bulb (6) of the manual fuel pump
7‑10 times – even when the bulb is still filled
with fuel
13.1 Starting
370BA092 KN
► Place the cut-off machine carefully on the
ground, ensuring that the abrasive wheel can‐
not touch the ground or any objects. There
must not be anyone within the swivel range of
the cut-off machine
► Make sure you have a firm footing
► Press the cut-off machine firmly against the
ground, holding the handle with your left hand,
thumb wrapped round the handle
► Press the cut-off machine against the ground
with the right knee on the shroud
► Pull the starter grip slowly with your right hand
until you feel it engage – then give it a brisk
strong pull – do not pull out the starter rope all
the way
NOTICE
Do not let the starter grip snap back – it may
break! Guide it back into the housing in the
opposite direction so that it can rewind properly.
13.2 When the engine has turned
over for the first time
4
370BA057 KN
Choke
► Set the choke lever (4) to
f
► Press the button of the decompression valve
(depending on version)
► continue cranking
13.3 Once the engine is running
► Squeeze throttle trigger fully and let engine
run at full throttle for approx. 30 s
English 13 Starting / Stopping the Engine
26 0458-370-8321-C