Stihl TS 410, Instruction Manual, Page: 22 / 40

10 Mounting an Abrasive
Wheel
The engine must be switched off for fitting or
replacement – set slide control to STOP or 0.
10.1 Blocking the shaft
370BA014 KN
1
► Slide the locking pin (1) through the bore in
the V‑belt guard
► Turn the shaft with the combination wrench
until the locking pin (1) engages in the bore
behind the guard
10.2 Removing a cutting wheel
2
370BA053 KN
► Use the combination wrench to loosen and
remove the hexagon head screw (2)
► Remove the front thrust washer (3) from the
shaft together with the cutting wheel
10.3 Fitting a new cutting wheel
370BA054 KN
4
► Fit the new cutting wheel (4)
English 10 Mounting an Abrasive Wheel
22 0458-370-8321-C