STIHL TS 400 45
Pick-up body
• Draw the pick-up body out of the
fuel tank with assembly hook (1).
Note:
Do not overextend the fuel
hose.
10.6
Fuel hose
10.5
Pick-up body
Fuel is transferred from the fuel tank
to the carburetor via the fuel line by
the diaphragm pump. Any impurities
entering the fuel tank with the fuel
are trapped by the pick-up body
(filter). The fine filter pores become
clogged with minute dirt particles in
the course of time. The intake area is
reduced and the pump no longer
delivers sufficient fuel.
Important!
The fuel tank and
pick-up body must always be
inspected first if any malfunctions
develop in the fuel supply. The fuel
tank must be cleaned if necessary.
- Remove tank vent, see 10.4.
- Remove pick-up body, see 10.5.
• Press fuel hose off elbow
connector.
• Prise the hose flange out of the
fuel tank.
• Draw the pick-up body off the
fuel hose.
- Replace pick-up body.
The parts are installed in reverse
order.
• Press fuel hose out to the side
under the carburetor.
Cleaning the fuel tank
• Unscrew filler cap and drain tank
- Fill with a little fresh petrol.
- Close the filler cap and shake the
cut-off machine vigorously.
- Reopen and drain the tank.
Note:
Fuel must be disposed of
correctly!