0478 131 8365 C - EN
34
Thread a grommet (1) onto each of the two
wire ends (2).
1
Fold open the left clamping lever (1).
2
Insert the stripped wire end (2) into the
terminal block as far as it will go.
3
Close the clamping lever (1).
Strip the right wire end (1) to the specified
length
X
using a suitable tool and twist the
wire strands.
X
= 10-12 mm
1
Fold open the right clamping lever (1).
2
Insert the stripped wire end (2) into the
terminal block as far as it will go.
3
Close the clamping lever (1).
Fit the grommets over the terminal blocks.
Check the seating of the wire ends in the
terminal block: the two wire ends must be
firmly fastened.
●
Close the cover of the cable duct (1).
●
After completing this installation
work, press the OK button.
Summary of Contents for RMI 522 C
