R1 SERIES PULL-TYPE DISC MOWER
- QUICK START GUIDE
WINDROW
Side Deflectors
(A) Wide: Deflectors outboard
(B) Narrow: Deflectors inboard
Roll Cond: Move bar (C)
Finger Cond: Move handle (D)
WINDROW TIPS:
• Sharp blades reduce horse power requirements.
• Install cutterbar filler plates in tall, stemmy crops.
• Remove filler plate to reduce dirt accumula tion in cutterbar.
FLOAT
Rocks/Ridges/Loose Ground
(100 lb):
1. Loosen (C)
2. Turn (D) Clockwise
3. Tighten (C)
Smooth/Level/Firm Ground
(125–150 lb):
1. Loosen (C)
2. Turn (D) Counterclockwise
3. Tighten (C)
TRANSPORT
Switch at (A)
Light (C) on
Switch at (B)
Light (C) off
Field Mode
Transport Mode
(A) Wide: Lower baffle (C)
(B) Narrow: Raise Baffle (C)
Finger Baffle
Roll Baffle
GROUND SPEED
Smooth/Level/Firm Ground:
10 mph (16 kph) and higher
until cutting and conditioning
quality are compromised.
Rocks/Ridges/Loose Ground:
Slow to minimize bouncing,
uneven stubble and damage
to cutter bar.
DISC SPEED
800 PTO rpm
1000 PTO rpm
Light/Thin Crop
Heavy/Tough Crop
(A) acres/hr, (B) hectares/hr, (C) kph, (D) mph, (E) 16 ft., (F) 13 ft.
