![background image](http://html1.mh-extra.com/html/stihl/rme-545/rme-545_instruction-manual_1379494048.webp)
0478 121 9910 A - EN
46
– Mower housing is blocked
– Fuse in plug faulty (GB version)
Remedy:
– Check fuse (
– Check cable/plug/switch and replace if
– Do not switch on motor in high grass,
– Allow machine to cool down (
– Replace fuse in plug (
#
)
Fault:
Frequently tripped mains fuse
Possible cause:
– Unsuitable electric cable
– Power overload
– Machine is overloaded due to mowing
grass which is too long or too wet
Remedy:
– Use suitable electric cable (
– Connect machine to another circuit
– Adapt cutting height and mowing speed
Fault:
Excessive vibration during operation
Possible cause:
– Blade fastening screw is loose
– Blade is not balanced
– Motor mounting is loose
Remedy:
– Tighten blade fastening screw (
– Re-sharpen (balance) or replace blade
– Check screw fastenings of motor,
tighten screws if necessary (
#
)
Fault:
Poor cut, lawn turning yellow
Possible cause:
– Mowing blade is blunt or worn,
– Rate of feed is too high in relation to the
cutting height
Remedy:
– Re-sharpen or replace mowing blade
– Reduce rate of feed and/or select
Fault:
Problems switching machine on or
deteriorating motor power.
Possible cause:
– Mowing grass which is too long or too
wet
– Mower housing is blocked
Remedy:
– Adapt cutting height and mowing speed
– Clean mower housing (disconnect
Fault:
Discharge chute blocked
Possible cause:
– Mowing blade is worn
– Mowing grass which is too long or too
wet
Remedy:
– Adapt cutting height and mowing speed
Fault:
RME 545 V
: No drive when self-propulsion
lever is actuated
Possible cause:
– Self-propulsion cable incorrectly
adjusted
– Self-propulsion cable damaged (e.g.
kinked)
– V-belt worn
– Gearbox defective
Remedy:
– Replace cable (
#
)
– Replace V-belt (
#
)
– Replace gearbox (
#
)
Fault:
RME 545 V
: Vario drive speed control not
functioning.
Possible cause:
– Vario drive lever moved in wrong
direction
– Vario drive cable disengaged or
damaged (e.g. kinked)
Remedy:
– Move Vario drive lever in correct
direction (
– Attach or replace Vario drive cable (
#
)
Summary of Contents for RME 545
