background image

► STIHL recommends that you wear a face

shield.

► Wear a long-sleeved, snug-fitting upper gar‐

ment.

■ Noise occurs during operation. Noise can

harm your hearing.

► Wear hearing protection.

■ Falling objects can cause head injuries.

► If there is a danger of falling objects

during operation: Wear a safety hard

hat.

■ Dust can be whipped up during operation:

Whipped up dust can damage the respiratory

passages and cause allergic reactions.

► If dust is whipped up and forms a cloud:

Wear a dust respirator mask.

■ Inappropriate clothing can snag on wood,

brush or the saw. Not wearing suitable cloth‐

ing may result in serious injury.

► Wear snug-fitting clothing.

► Do not wear a scarf or jewelry.

■ The user can come into contact with the rotat‐

ing saw chain during operation. This can result

in serious injuries.

► Wear long trousers with cut-retardant inserts.

■ The user can be cut by the wood during oper‐

ation. The user can come into contact with the

saw chain during cleaning and maintenance

work. This can result in personal injury.

► Wear work gloves made of durable material.

■ Wearing unsuitable footwear may cause you

to slip or stumble. Contact with the rotating

saw chain can result in cuts. This can result in

personal injury.

► Wear chainsaw boots with cut retardant

inserts.

4.5

Work Area and Surroundings

WARNING

■ Bystanders, children and animals are not

aware of the dangers of the chainsaw or

thrown objects. Innocent bystanders, children

and animals may be seriously injured and

damage to property may occur.

► Keep bystanders, children and animals away

from the work area.

► Do not leave the chainsaw unattended.

► Make sure that children cannot play with the

chainsaw.

■ Hot exhaust gas is emitted through the muffler

while the engine is running. Hot exhaust gas

can ignite easily flammable materials and

cause a fire.

► Keep exhaust gas well away from easily

flammable materials.

4.6

Safe Condition

4.6.1

Chainsaw

The chainsaw is in a safe condition if the follow‐

ing points are observed:

The chainsaw is not damaged.

There is no fuel leaking from the chainsaw.

The fuel tank and oil tank caps are closed.

The chainsaw is clean.

The chain catcher is fitted and undamaged.

The chain brake is operating properly.

The controls function properly and have not

been modified.

The chain lubrication is operating properly.

Wear marks on the chain sprocket are not

deeper than 0.5 mm.

A combination of guide bar and saw chain rec‐

ommended in this User Manual is mounted.

The guide bar and saw chain are properly

mounted.

The saw chain is properly tensioned.

Only original STIHL accessories designed for

this chainsaw model are fitted.

The accessories are correctly attached.

WARNING

■ If not in safe condition, components may no

longer operate correctly, safety devices may

be disabled and fuel leakage may occur. This

may result in serous or fatal injury to people.

► Work only with an undamaged chainsaw.

► If fuel is leaking from the chainsaw: Do not

use the chainsaw and contact a STIHL

dealer for assistance.

► Close the fuel tank and oil tank caps.

► If the chainsaw is dirty: Clean the chainsaw.

► Work only with property fitted and undam‐

aged chain catcher.

► Never modify your chainsaw. Exception:

Mounting a combination of guide bar and

saw chain recommended in this User Man‐

ual.

► If the controls do not function properly: Do

not use your chainsaw.

► Only fit original STIHL accessories designed

for this chainsaw model.

► Mount the guide bar and saw chain as

described in this User Manual.

► Attach accessories as described in this User

Manual or in the User Manual for the acces‐

sories.

4 Safety Precautions

English

0458-890-8321-B. VA0.A21.

5

Summary of Contents for MS 881

































Reviews: