Stihl MS 881, Instruction Manual

Page: 29 / 32

For information on compliance with Employers'
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
19.5 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
19.6 Exhaust Emissions
The CO
2
value measured in the EU type approval
procedure is specified at www.stihl.com/co2.
The measured CO
2
value was determined on a
representative engine in accordance with a
standardized test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this instruction manual. The
type approval expires if the engine is modified in
any way.
20 Bar and Chain Combinations
20.1 STIHL MS 881 Chainsaw
Pitch Drive link
gauge/groove
width
Length Guide bar Number of
teeth,
sprocket
nose
Number of
drive links
Saw chain
.404“ 1.6 mm
53 cm Duromatic - 68
46 RM (Type
3668)
46 RS (Type
3946)
63 cm
Rollomatic ES 12
80
Duromatic -
75 cm
Rollomatic ES 12
91
Duromatic -
90 cm
Rollomatic ES 12 108
Duromatic - 104
105 cm Rollomatic ES 12 123
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. The actual
cutting length of a guide bar may be less than the specified length.
21 Spare Parts and Accesso‐
ries
21.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
22 Disposal
22.1 Disposing of Chainsaw
Information on disposal is available from STIHL
servicing dealers.
► Dispose of the chainsaw, guide bar, saw
chain, fuel mix, gasoline, two-stroke engine oil,
accessories and packaging in accordance with
local regulations and environmental require‐
ments.
23 EC Declaration of Con‐
formity
23.1 STIHL MS 881 Chainsaw
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
20 Bar and Chain Combinations English
0458-890-8321-B. VA0.A21. 29