64
MS 311, MS 391
10.2.2 Throttle Rod
– Disconnect the throttle rod from
the trigger,
– Remove the filter base,
:
Pry the throttle rod (1) out of the
carburetor carrier (2).
:
Pull the throttle rod in the
direction of the handle until its
bent end (1) is in front of the
opening (arrow).
0001RA303 TG
1
2
4903RA170 Tg
1
:
Rotate the throttle rod (1) about
90° counterclockwise. Pass the
throttle rod (1) through the
opening (arrow) in the direction of
the tank housing and remove it.
Installing
:
Line up the throttle rod (1) (see
illustration).
:
Push the throttle rod (1) between
the tank housing and air guide
shroud and rotate it about 90° at
the same time.
4903RA171 TG
1
4903RA172 TG
1
:
Pass the throttle rod (1) through
the opening (arrow).
:
Rotate the bent end (1) clockwise
and push it under the throttle
trigger.
:
Push the throttle rod (1) into the
guide (2) in the carburetor carrier
until it snaps into position.
– Check operation – the throttle
lever on the carburetor must
move upwards when the throttle
trigger is pulled.
– Reassemble in the reverse
sequence.
4903RA173 TG
1
0001RA310 TG
1
2
Summary of Contents for MS 311
Page 1: ...STIH STIHL MS 311 391 2009 06 ...
Page 92: ...91 MS 311 MS 391 ...
Page 93: ...92 MS 311 MS 391 ...
Page 94: ...englisch english 0455 542 0123 M2 2 K09 FST Printed in Germany ...