![background image](http://html1.mh-extra.com/html/stihl/ms-240/ms-240_instruction-manual_1378885017.webp)
MS 240
English
15
N
Fit the guide bar over the studs (1) –
the cutting edges on the top of the
bar must point to the right.
N
Engage the peg of the tensioner
slide in the locating hole (2) –- place
the chain over sprocket (3) at the
same time.
N
Turn the tensioning
screw (4)clockwise until there is
very little chain sag on the
underside of the bar – and the drive
link tangs are engaged in the bar
groove.
N
Refit the sprocket cover and screw
on the nuts only fingertight.
N
Go to chapter on "Tensioning the
Saw Chain"
Removing the chain sprocket cover
N
Unscrew the nut and remove the
chain sprocket cover.
N
Turn the screw (1)
counterclockwise until the
tensioning nut (2) butts against the
left end of the housing slot.
Disengage the chain brake.
N
Pull the hand guard towards the
front handle until there is an audible
click – the chain brake is
disengaged.
Fitting the chain
N
Fit the chain – start at the bar nose.
3
1
1
2 4
001BA187 KN
Mounting the Bar and
Chain (front chain
tensioner)
143BA034 KN
1
2
207BA009 KN
Wear work gloves to protect your
hands from the sharp cutters.
001BA186 KN
143BA003 KN
Summary of Contents for MS 240
