![background image](http://html1.mh-extra.com/html/stihl/ms-240/ms-240_instruction-manual_1378885009.webp)
MS 240
English
7
Pushback (B)
Pushback occurs when the chain on the
top of the bar is suddenly pinched,
caught or encounters a foreign object in
the wood. The reaction of the chain
drives the saw straight back toward the
operator.
To avoid pushback
.
–
Be alert to situations that may cause
the top of the guide bar to be
pinched
–
Do not twist the guide bar in the cut.
Exercise extreme caution
–
with leaners
–
with trees that have fallen
unfavorably between other trees
and are under strain
–
when working in blowdown areas.
Do not work with the chainsaw in such
circumstances. Use block and tackle,
cable winch or tractor.
Pull out exposed and cleared logs.
Select clear area for cutting.
Deadwood
(dry, decayed or rotted
wood) represents a considerable risk
that is difficult to assess. Identifying the
extent of the dangers is complicated, if
not impossible. Use aids such as a cable
winch or tractor in such cases.
When felling in the vicinity of roads,
railways, power lines,
etc., take extra
precautions. If necessary, inform the
police, utility company or railway
authority.
Cutting
Do not operate your saw with the
starting throttle lock engaged. Engine
speed cannot be controlled with the
throttle trigger in this position.
Work calmly and carefully – in daylight
conditions and only when visibility is
good. Ensure you do not endanger
others – stay alert at all times.
Use the shortest possible guide bar: The
chain, guide bar and chain sprocket
must match each other and your saw.
Position the saw so that your body is
clear of the cutting attachment.
Always pull the saw out of the cut with
the chain running.
Use your chain saw for cutting only. It is
not designed for prying or shoveling
away limbs, roots or other objects.
Do not underbuck freely hanging limbs.
To
reduce the risk of injury
, take
special care when cutting shattered
wood because of the risk of injury from
slivers being caught and thrown in your
direction.
Make sure your saw does not touch any
foreign materials: Stones, nails, etc. may
be flung off, damage the saw chain or
cause the saw to kick back
unexpectedly.
If on a slope, stand on the uphill side of
the log. Watch out for rolling logs.
When working at heights:
–
Always use a lift bucket
–
Never work on a ladder or in a tree
–
Never work on an insecure support
–
Do not work above shoulder height
–
Never operate your unit with one
hand
001BA038 KN
B
001BA082 KN
001BA033 KN
Summary of Contents for MS 240
