![background image](http://html1.mh-extra.com/html/stihl/ms-240/ms-240_instruction-manual_1378885033.webp)
MS 240
English
31
In some countries the muffler is
equipped with a spark arresting screen.
N
If the engine is down on power,
check the spark arresting screen in
the muffler.
N
Wait for the muffler to cool down.
N
Take out the screw (1).
N
Pull out the spark arresting
screen (2).
N
Clean the spark arresting screen. If
the screen is damaged or heavily
carbonized, fit a new one.
N
Refit the spark arresting screen.
N
Insert the screw and tighten it down.
Power tools with a catalytic converter
(depending on model) must be run on a
50 : 1 mixture of
unleaded gasoline
and
STIHL two-stroke engine oil
or
equivalent two-stroke engine oil – see
chapter on "Fuel".
The catayltic converter integrated in the
muffler reduces the harmful emissions in
the exhaust gas.
The correct carburetor setting (if
adjustable) and strict observance of the
prescribed mix ratio of gasoline and two-
stroke engine oil are essential to
minimize harmful emissions and ensure
a long catalytic converter service life.
N
If the engine is down on power,
difficult to start or runs poorly at idle
speed, first check the spark plug.
N
Fit a new spark plug after about 100
operating hours – or sooner if the
electrodes are badly eroded. Install
only suppressed spark plugs of the
type approved by STIHL – see
"Specifications".
Removing the Spark Plug
N
Move the Master Control lever to the
stop position (
0
).
N
Turn the twist lock (1) above the
rear handle 90° counterclockwise.
N
Lift off the carburetor box cover (2)
vertically.
Spark Arresting Screen in
Muffler
1
143BA036 KN
2
143BA037 KN
Catalytic Converter
Spark Plug
2
1
133BA007 KN
Summary of Contents for MS 240
